#8 AWG Copper, Aluminum and Other Soft Metals (1)
10 - 20 AWG, 12 - 22 AWG (1)
10-12 Solid and 12-14 Stranded Wire; Noninsulated Connectors, Lugs and Terminals (1)
10-in-1, 11-in-1 and 10-Fold™ Screwdriver/Nut Drivers (2)
16 AWG (1)
8-16 AWG Solid and 10-18 AWG Stranded Wire (2)
ACSR, Screws, Nails and Most Hardened Wires (1)
ACSR, Screws, Nails, Most Hardened Wire (11)
ACSR, Screws, Nails, Most Hardened Wire; Crimps Noninsulated Connectors, Lugs and Terminals; Pulls Steel Fish Tape (1)
ACSR, Screws, Nails, Most Hardened Wire; Pulls 1/8'' or 1/4'' (3.2 or 6.4 mm) Flat Steel Fish Tape (1)
Alternative 45 Degree Mounting for Flush Cutting (1)
Bare ACSR, Aluminum and Stranded-Copper Cables (3)
Bolt Applications (2)
Cable Connection (4)
Cable Preparation (2)
Cable Stripping (2)
Cable Testing (1)
Calculation of: Area, Length, Volume, and Pythagoras Measurements (1)
Conduit and Pipe (2)
Crimps Non-Insulated Solderless Terminals and Connectors (1)
Crimps UR/UY/UG Insulation Displacement Connectors (IDC)- Scotchlok Type Connectors, Cleanly Strips 23 AWG and 24 AWG Wires (1)
Cut and Trim Sheet Metal and Cut Wires (1)
Cut BX and 3/8" Armored Cable (1)
Cuts ACSR, Screws, Nails and Most Hardened Wire (1)
Cuts and Crimps Wire 10-22 AWG (1)
Cuts and Strips Wires (2)
Cuts Cable, Telephone Wire, and Strips Insulation (1)
Cutting and Slicing (1)
Cutting Copper and Aluminum Cable (1)
Cutting PVC (1)
Cutting, Twisting, Stripping, Tweezing, Driving (1)
Designed For Greater Capacity in Tight Work Spaces (1)
Designed to Fit Over the Lip of a Utility Bucket Truck (1)
Determine Wiring Condition in Outlet (1)
Electrical (1)
Electrical and Telecommunications Work (1)
Electrical Metallic Tubing (EMT) (4)
Electricians (1)
Electrician's Multimeters and Select Clamps (1)
Electronics (1)
Extra-High-Strength Cables, Messenger, Guy Strand (1)
For Aluminum, Brass, Copper, Plastic and Up to 10 Gauge Metal (1)
For Cable Cutting in Confined Spaces (2)
For Reaching 1/2" (1.3 cm) and 3/4" (1.9 cm) Connectors in Deep or Tight Boxes (1)
For Skin and Hand Cleansing (1)
For Work Near Energized Sources (2)
Form New Threads, Re-form Burred Threads or Clean Out Plaster Obstructions (2)
General Purpose (6)
HVAC (1)
Light Duty Cable or Rope Pulling (1)
Locate Circuit Breakers in Panel, Test GFCI Devices (1)
Long Bolts, Studs or Threaded Rod (3)
Lunch, Food Cooler (2)
Measure Voltage and Continuity and Ensure GFCI Devices are Functioning Properly (1)
Measures AC Current (2)
Measures AC Current, DC micro-Amp current (1)
Measures Current (1)
Measures Current to 2000A AC/DC (1)
Non Ferrous Wire and Soft Metal Cutting (1)
Nut Driving on Unlimited Bolt Lengths (6)
Phone Storage (5)
Pick-up Tool (1)
Pole Hardware Installation and Removal (1)
Pull Cable Behind Finished Walls and Other Enclosed Spaces (1)
PVC Block is Used for Storing the Bits, Which Can Be Used for a Variety of Applications; The Block Can Be Placed Onto Any Screwdriver for Storage (1)
Retrieving and Pulling Wire in Electrically Sensitive Areas (1)
Scotchlok UG, UR and UY connectors (1)
Side Cutting (1)
Side Cutting; Stripping (1)
Soft Annealed Rebar Tie Wire (2)
Specifically Designed for Locking Out Power Sources such as Disconnects, Switches, and Panel Boxes (1)
Storage (1)
Stripping Six Standard Wire Size without Nicking Wires (1)
Strips 12 AWG Wires (2)
Strips and Cuts 10-20 AWG Solid, 12-22 AWG Stranded, 12/2 and 14/2 Romex® (1)
Stub Ups, Offsets, Back-to-Back, Saddle Bends and Other Bends (1)
Telecom, Electrical, Heavy-Duty Cutting (1)
Testing and Measuring Voltage (1)
Tightening (1)
To Perform Variety of Piercing and Punching Jobs (1)
Tool Carrying (1)
Tools, Meters, Small Parts and Tech Devices (1)
Tough Applications (1)
Turning Fasteners (4)
Turning Fastners (1)
UG, UR and UY connectors (1)
Use with Klein Clamp Meters (1)
Wire Cutting; Stripping (2)
Wire Pulling (1)
Wire Stripping and Cutting (7)
Wire Stripping, Cutting and Crimping (1)
Wire Toning & Tracing (1)