Product image for Sylvania 21671 32 W 82 CRI 4100 K 2850 lm Medium Bi-Pin Base U-Shaped Fluorescent Lamp
Image thumbnail 0
Image thumbnail 1
Image thumbnail 2
Email

Sylvania 21671 32 W 82 CRI 4100 K 2850 lm Medium Bi-Pin Base U-Shaped Fluorescent Lamp

Manufacturer: LEDVANCE Sylvania | Catalog # FBO32/841/6/ECO/21671 | Codale Part # 2379741
$20.08/ea
ea
Log in or register to view your price, purchase history, and more!
40 available

For Delivery

Not in local stock *
Check your local branch
Primary Spec Sheet MDM Safety Data Sheet
32W, 22.5" MOL, T8 OCTRON Curvalume fluorescent lamp, 6" leg spacing, 4100K color temperature, rare earth phosphor, 82 CRI, suitable for IS or RS operation, ECOLOGIC

Technical Information

Applications
Commercial/Residential
Average Rated Life
20000 hr
Base
Medium Bipin
Bulb Shape
T8
Color Accuracy
82
Color Rendering Index
82
Color Temperature
4100 K
Correlated Color Temp
4,100 K
Lumens
2,850 Lumen
Total Harmonic Distortion
Ballast Dependent
Type
Fluorescent
Voltage
137 Volt
Wattage
32 Watt

Manufacturer Information

Brand
Sylvania
Sub Brand
OCTRON Curvalume Ecologic

General Product Info

12-Digit UPC
046135216718
Finish
phosphor
Product UPC
04613521671
Footnotes
  • The life rating of OCTRON and OCTRON Curvalume lamps operated on magnetic rapid start ballasts is 20,000 hours. The life rating of OCTRON and OCTRON Curvalume lamps operated on instant start electronic ballasts is 15,000 hours.
  • OCTRON lamps should be operated only with magnetic rapid start ballasts designed to operate 265 mA, T-8 lamps or high frequency (electronic) ballasts that are either instant start, or rapid start, or programmed rapid start specifically designed to operate T8 lamps. OCTRON lamps may be operated on instant start or programmed rapid start ballasts with ballast factors ranging from a minimum of 0.71 to a maximum of 1.20 at the nominal ballast input voltage (see ballast specs for details). When OCTRON lamps are operated in the instant start mode, the two contacts (bi-pin lamps) of each rapid start lampholder/socket should be connected to each other or use \"shunted\" circle I lampholders/sockets for instant start bi-pin lamps. Always disconnect power before servicing installations and wire per the balla schematics and National Electric Code.
  • Minimum starting temperature is a function of the ballast; consult the ballast manufacturer.
  • Approximate length of OCTRON CURVALUME lamps is measured from base face to outside of glass bend.
  • SYLVANIA ECOLOGIC fluorescent lamps are designed to pass the Federal Toxic Characteristic Leaching Procedure (TCLP) criteria for classification as non-hazardous waste in most states. TCLP test results are available upon request. Lamp disposal regulations may vary, check your local & state regulations. For more information, please visit www.lamprecycle.org
  • The life ratings of fluorescent lamps are based on 3 hr. burning cycles under specified conditions and with ballast meeting ANSI specifications. If burning cycle is increased, there will be a corresponding increase in the average hours life.
  • Approximate initial lumens after 100 hours operation.
Compare