Product image for CHEMLINK F1354-GR 4-IN E-CURB ROUND KIT CONTAINS (4) CURBS 1.5 GALLON POUCH 1PART POURABLE SEALER AND (2) CARTRIDGES M-1 SEALANT
Image thumbnail 0
Image thumbnail 1
Email

CHEMLINK F1354-GR 4-IN E-CURB ROUND KIT CONTAINS (4) CURBS 1.5 GALLON POUCH 1PART POURABLE SEALER AND (2) CARTRIDGES M-1 SEALANT

Manufacturer: Chemlink | Catalog # F1354GR | Codale Part # 4193422
$278.00/ea
kt
Log in or register to view your price, purchase history, and more!
73 available

For Delivery

Not in local stock *
Check your local branch
E-Curb penetration seals replace old-style metal pitch pans with versatile, precast components and 1-Part polyether pourable sealants. CHEM LINK.s E-Curb System can usually be installed in under 15 minutes and never requires flashing or mechanical attachment. E-Curbs are designed for use on granulated modified bitumen, asphalt and coal tar B.U.R. (built up roofing). E-Curbs are specified for PVC, EPDM, PIB, and TPO single ply roofing membranes. E-Curbs are highly versatile for sealing penetrations around solar panel mounts, HVAC, Electrical, and any type of structural supports. TPO Primer is required for use with TPO single-ply roof membrane.

Manufacturer Information

Brand
Chem Link

General Product Info

12-Digit UPC
810678013901
Product UPC
81067801390
Weight
8.8300 lb
Installation
  • Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealants performance. Remove all previously applied caulk, mastic, cement, asphalt, and other contaminants from penetrations with a wire brush. Brush away all gravel or loose granules. Isopropyl alcohol is an effective cleaner for surface preparation. Please contact customer service for application guidelines with temperatures below 32°F (0°C). Do not use on TPO without the use of TPO primer. Do not use on Hypalon. Smooth APP membranes require a granulated target. This product sets rapidly upon exposure to moisture. Please refer to data sheet for step-by-step installation guidelines.
Rapid Install
  • Slip-fit' light weight curb design
Service Temps
  • Wide range -40F to 200F
1 Part Feature
  • Accommodates movement
Labor Savings
  • No flashing required
Compare