Product image for Hoffman P2P168 ProLine G2 Full Mounting Subpanel, 1600x800, White
Image thumbnail 0
Image thumbnail 1
Image thumbnail 2
Email

Hoffman P2P168 ProLine G2 Full Mounting Subpanel, 1600x800, White

Manufacturer: nVent Hoffman | Catalog # P2P168 | Codale Part # 4243856
$458.86/ea
ea
Log in or register to view your price, purchase history, and more!
Experiencing long lead times. Please call for availability.
Primary Spec Sheet
The ProLine G2 Subpanel is part of the new patent pending EZ-Load Mounting System which was designed to maximize space utilization and to make loading the subpanel faster and safer by providing a variety of loading options. The EZ-Load Glide Blocks can be used to load a subpanel vertically from the front, rear or side. Additionally, they can be used to load the subpanel horizontally—a new method for a more controlled option to load a subpanel into a modular enclosure.

Technical Information

Applications
Controls and Drives; Power Distribution
Gauge
12 (2.5) mm
Material
Steel
Type
Non-Reversing

Manufacturer Information

Brand
nVent Hoffman

General Product Info

12-Digit UPC
783510324070
Color
White
Finish
Powder Coated
Product UPC
78351032407
Weight
64 lb

Dimensions

Height
2-1/4 Inch
Length
64 Inch
Thickness
2.66 mm
Width
33.00 in
Features
  • Accommodates five loading options: vertical front, vertical side, vertical rear, horizontal front (frame over subpanel), horizontal rear (subpanel lowered into frame)
  • High space efficiency ratio (HxW of subpanel)/(HxW of frame) of 84 percent
  • Mounting subpanel is securely fastened at the top and bottom of the enclosure; subpanels less than 1200mm wide include four sets of EZ-Load Glide Blocks, four BV-M6 fasteners (block to frame) and four M12 Hex Bolts (subpanel to block); Subpanels 1200mm and greater include eight sets of EZ Load Glide Blocks, eight BV-M6 fasteners (block to frame) and eight M12 Hex Bolts (subpanel to block) to ensure wider subpanels are well supported
  • Subpanels greater than 1000mm wide are 11 gauge (3.0 mm) mild steel, while subpanels 100mm or narrower are 12 gauge (2.5mm); conductive or white painted finish available
  • Subpanels can be mounted at any depth in 25-mm increments (front to back); accommodates back-to-back and fully recessed rear positions
  • Side-mount panels must be used for the sides of the enclosure; they can be installed on the interior sides of frames
  • Optional panel support bracket available for applications requiring more support in the center of the subpanel; this is required if the enclosure will be tipped in transit or if the panel is not located at the bottom of the enclosure on the glide blocks
Compare